Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Chino, CA
Gate installation in Chino runs $1,800 to $9,500 depending on the gate type, operator, and access control, and most jobs take one to three days once materials arrive. Falcon Gate Repair has served Chino since 2018, and we work on the two very different housing stocks that define this city: the 1960s-to-1980s tract homes near downtown and the newer master-planned communities in 91708, where HOA rules shape nearly every installation decision. Call (833) 918-6938 for a free estimate on any gate project.
Why Chino Homes Are Different
Chino splits into two housing generations, and each one changes the way gate work gets done. East of downtown, the older tract homes from the 1960s through the 1980s sit on standard lots with a mix of wood, chain-link, and welded iron driveway gates. Those gates have decades of Inland Empire sun on them, which means dried and warped wood, cracked and chalky vinyl, and iron finishes that have baked down to bare metal in places.
The 91708 ZIP is a different world. The Preserve and its surrounding communities added hundreds of homes in the past decade, most of them with builder-grade vinyl and ornamental iron gates that were installed at the same time and are now failing on the same schedule. Sagging hinges, sticking latches, and split posts show up in waves out there because every gate on the block is the same gate with the same parts and the same age.
Then there’s weather. Chino’s hot, dry summers and Santa Ana wind events beat on gate surfaces year after year. UV breaks down vinyl and bakes iron finishes. Dry-season soil movement shifts posts and hinges out of alignment. And when the winds come through, lighter gates get bent or blown over entirely. Add HOA architectural review in the newer tracts, and you’ve got jobs where the hardware is only half the challenge.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Chino Services
Chino homeowners call us most about two things: a gate that’s sagging, stuck, or off its track, and an electric operator that’s stopped responding. Here’s what each one involves here.
Gate Repair in Chino
In Chino, we see a lot of sagging driveway gates on the older east-side homes and a steady run of failed builder hardware in the Preserve area. The climate works against gates here: dry soil moves posts, UV breaks down vinyl and wood, and wind events bend lighter gates. We repair hinges, latches, rollers, posts, and framing on gate systems from all nine brands we service. If your gate drags, won’t latch, or leans hard to one side, the job usually starts with a realignment and ends with hardware replacement. Gate Repair in Chino covers the full scope of what we fix.
Electric Gate Repair in Chino
Electric gate repair in Chino means diagnosing the operator, the control board, the safety loops, and the access hardware like keypads and remotes. Santa Ana season brings a spike in calls: power fluctuations damage boards, and wind-blown gates bind motors. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so we diagnose by brand logic rather than guessing. Electric Gate Repair in Chino details how we get automated systems back online.
Gate Installation in Chino
Gate installation in Chino means matching the right gate and operator to the right property, and in a city with this much HOA governance plus this much sun and wind, the details matter. In The Preserve specifically, a single gate replacement often triggers architectural review: the replacement must match the community’s approved design and color palette exactly. Our team has walked enough of these Chino jobs to know the guidelines as well as the hardware, so the install doesn’t stall at the approval stage. From permits to final programming, Gate Installation is handled end to end under one name, and the price is agreed before work begins.
Driveway Gate Installation
Signs you need it
Your existing gate is rusted through, the posts are leaning beyond shimming, or you’ve simply outgrown a manual gate and want automated access.
What it costs in Chino
Driveway gate installation in Chino typically runs $2,500 to $7,000 for a standard single gate with a basic operator, depending on material and width.
How we do it
We measure the opening and set new posts in concrete, mount the gate leaf and hardware, then install and program the operator including safety edges, keypad, and two remotes.
Sliding Gate Installation
Signs you need it
Your lot has a steep or short driveway where a swing gate can’t open, or you need to gate a wide commercial access point.
What it costs in Chino
Sliding gate installation in Chino lands between $3,500 and $9,500 for residential work, with commercial-width sliding gates running higher depending on operators and access control.
How we do it
We set the track and foundation, install the sliding leaf and rollers, then mount the operator and safety loop wiring before testing the full open-close cycle.
What Gate Installation Costs in Chino
| Item | Typical range in Chino |
|---|---|
| Manual ornamental iron gate | $1,800 – $4,200 |
| Automated driveway gate with operator | $2,500 – $7,000 |
| Sliding gate with operator | $3,500 – $9,500 |
What moves the price in Chino is the HOA review in The Preserve (more exacting material and color specs), plus the extra post depth and anchoring needed for our dry, shifting soil. Your quoted price is the price you pay: we agree on the full figure before any work starts.
Does Chino require a permit for gate installation?
Many Chino gate installations need a permit, and in HOA-governed tracts like The Preserve you’ll also need architectural approval before the gate goes in. We handle the paperwork and the specs, so the review doesn’t fail on a color or material mismatch.
Can you match my HOA’s gate design in The Preserve?
Yes. We work from the community’s approved design and color palette when replacing or installing gates in the 91708 tract, and we’ve handled enough Preserve jobs to know which specs need to be confirmed before ordering materials.
Brands We Service in Chino
We’re factory-familiar with nine gate operator brands, and in Chino the names we see most are FAAC and BFT on higher-end residential and commercial systems, plus Linear and Viking on older HOA gates. We stock common boards, remotes, receivers, and safety-edge components locally, which keeps most repair turnarounds to a single visit. See our brands for the full lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Chino, CA
| Service | Typical range in Chino |
|---|---|
| Gate realignment and hinge repair | $150 – $350 |
| Latch and lock replacement | $85 – $220 |
| Post reset (single post) | $300 – $650 |
| Gate off track | $150 – $300 |
| Chain-link gate repair | $100 – $250 |
| Wood gate repair | $150 – $400 |
| Electric gate diagnostic | $75 – $150 |
| Operator motor replacement | $600 – $1,500 |
| Control board repair or replacement | $350 – $900 |
| Safety sensor or loop repair | $225 – $500 |
| Manual ornamental iron gate | $1,800 – $4,200 |
| Automated driveway gate with operator | $2,500 – $7,000 |
In Chino, prices push higher when HOA specs demand non-standard materials, when posts need deeper concrete for shifting soil, or when Santa Ana damage takes out both the gate and the operator. Every quote is fixed upfront and agreed to before we begin, so you’ll never see a surprise invoice at the end.
Neighborhoods We Serve in Chino
We cover both sides of Chino, from the older east-side tracts to the newer planned communities. Our typical response window is within one business day for repair calls, with same-day dispatch available for emergencies when our schedule allows.
- The Preserve
- East Chino near downtown
- College Park area
- West Chino off Pine Avenue
- Chino Airport industrial district
Service Area – Cities Near Chino
Falcon Gate Repair is based in Upland, and we run Chino calls every week. The same team also covers Ontario, CA, Chino Hills, CA, Montclair, CA, and Eastvale, CA, so if your gate is on the edge of town or you manage properties across the 60, we’re already nearby.
Serving Chino, CA – Our Local Coverage Area
We’re based in the Chino area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Chino
We typically reach Chino within one business day for repair calls, and we keep same-day slots for emergencies when possible. Since we run Chino jobs weekly from our Upland base, scheduling is straightforward. Call (833) 918-6938 to confirm today’s availability.
We supply the specs your HOA needs: material, color, style, and dimensions matched to the community’s approved design. You submit for approval, and we install once it clears. In most Preserve tracts, matching the existing gate exactly is the fastest path through review.
Yes, we cover both 91708 and 91710, from The Preserve on the south side to the older neighborhoods east of downtown. If your gate sits at the edge of Chino near Ontario or Chino Hills, we’re already running calls in those areas regularly.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Chino Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Elena Martinez"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Alicia Carter"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Adam Sullivan