Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Upland
If your gate won’t open, sags on its hinges, or has jumped its track on an Upland property, you need a technician who already knows what’s wrong. Falcon Gate Repair fixes automated and manual gates across Upland every week, from the citrus-era streets near downtown to the foothill subdivisions north of the 210. We work on your brand specifically, diagnose from the motor to the control board, and carry the parts that get your gate back in service today. Call (833) 918-6938 for a free estimate. Gate repair in Upland is what we do, and we do it gate-only, every call.
Why Falcon Gate Repair Is Upland’s Preferred Gate Repair Company
Most gate problems in Upland trace back to two things: aging hardware and a dry, windy climate that punishes metal. Allen Prescott leads our team, and he made the call early on to focus exclusively on gates. That means we’re not a garage door company doing a side job. We’re gate-only specialists who carry gate-specific tools, gate stock, and the working knowledge of nine operator brands, including BFT, Linear, Viking, and Ghost Controls. When you call us for Gate Repair, you’re getting a tech who has already diagnosed your brand’s failure mode before arriving.
Upland homeowners deal with narrow shared driveways, old concrete, and mature tree canopies that leave little room to work. Our crew sets up so vehicles and pedestrians keep moving. We quote the job before any work starts, and we honor that number. No upselling, no surprise line items on the final invoice. When an Upland gate is down, it blocks access, and we treat that urgency as the priority it is.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Sliding Gate Repair in Upland
Sliding gate repair in Upland usually comes down to a jammed track, a worn wheel assembly, or a motor that struggles against a misaligned roller. On tight Upland lots where a swing gate would block the driveway or sidewalk, the sliding gate is the only option that works, and it takes a beating. Santa Ana winds push dust and grit into the track. Older steel frames flex in the heat. The result: a gate that grinds, jumps, or stops midway. We address all of it, from the motor to the control board.
Track, Wheels, and Rollers That Fail Quietly
On many Upland sliding gates, the first sign of trouble is a soft thump every few feet. That’s usually a flat spot on a steel wheel or a section of track that has pulled out of alignment. We pull the gate, true the track, and replace the wheel assemblies. A typical sliding gate wheel and track service in Upland runs $240 to $480, depending on how much of the track needs resetting.
Operators and Control Boards Under Wind Load
Linear and BFT slide operators are common on Upland sliding gates, and Santa Ana gusts put real strain on their limit switches and control boards. When the gate tries to fight the wind, the board sees an obstruction and throws a fault. Our techs read the fault codes by brand logic, not guesswork. Control board replacement on an Upland sliding gate typically runs $310 to $560, and we stock common boards locally for same-week service.
Wrought Iron Gate Repair in Upland
Wrought iron gate repair in Upland is a specialty of ours because this city still has thousands of original and second-generation iron gates from the citrus era. These gates were built well, but decades of repainting hide the slow failure of hinge welds and the pull of leaning posts. A wrought iron gate on an Upland property rarely needs full replacement. It needs a tech who can weld, shim, and correct the frame in place. We handle rusted hinge posts, sagging weld joints, and out-of-square frames without tearing out the whole assembly.
Weld Repairs That Match the Gate, Not Just Patch It
When an Upland wrought iron gate sags, the problem is rarely one clean break. It’s a series of fatigued welds at the top hinge and along the picket junctions. We grind back the old weld, clean the steel, and re-weld with the correct rod for the original metal. A typical wrought iron weld and alignment job in Upland runs $180 to $420, with the range driven by how much of the frame has drifted out of square.
Hinge and Post Work Without Blocking the Driveway
On a citrus-era property near downtown Upland, our crew repaired a sagging wrought iron swing gate hinged to a leaning post set in a cracked 1950s footing. We re-footed the hinge post in new concrete, corrected the sag, and replaced rusted hinges, keeping the shared driveway accessible throughout the work. That’s the kind of job we do regularly in Upland. Hinge and post repair here typically runs $220 to $480, with re-footing adding $200 to $450 when the original concrete has failed.
Trusted Brands We Service in Upland
Falcon Gate Repair is factory-familiar with the gate operators Upland homeowners actually own. Our techs carry working knowledge of BFT, Linear, Viking, Ghost Controls, and five other major brands, so we diagnose your system by its own logic, not by swapping parts until something works. For Upland customers, that means faster turnarounds and fewer return visits. We keep common control boards, remotes, and safety-edge parts in local stock, with everything priced and quoted before any work on your gate begins.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Upland Homes
- Hinge posts set in original cracked concrete footings lean, causing gates to drag and bind. On the older downtown and citrus-era blocks of Upland, we routinely find posts poured in the 1940s and 1950s, and the concrete has spalled beyond saving. The fix is re-footing, not shims.
- Santa Ana winds accelerate misalignment and hardware wear on iron and tubular-steel gates. Gusts from the Cajon Pass hit Upland hard, and every cycle flexes hinge welds and loosens bracket bolts. Gates that were square in March are dragging by October.
- Dry summers shrink wood posts and pull fasteners loose. Upland’s heat pulls moisture from wood posts and rails, leaving screw holes oversized and hinges rattling. Older wood-rail gates on 1960s tract homes are especially vulnerable.
- Winter rains push rust on older metal gates, compounding alignment issues. The brief wet season in Upland soaks iron gates after months of dry heat, and rust blooms at every paint crack around the hinges. We treat the rust at its source, not just over it.
Pricing for Gate Repair in Upland, CA
Most gate repairs in Upland fall into clear ranges based on what actually failed. A hinge and weld repair on a wrought iron gate runs $180 to $420. Sliding gate track and wheel service runs $240 to $480. Control board replacement runs $310 to $560. Hinge post re-footing, which is common on Upland’s older citrus-era properties, adds $200 to $450, because the old concrete almost always has to come out before the post can be reset. We quote every Upland job up front, in writing, before any work starts. Estimates are free. Call (833) 918-6938 and we’ll tell you exactly what the repair will cost before you commit to anything.
We Also Serve Cities Near Upland
Our Gate Repair in Upland service also reaches the surrounding foothill communities and valley roads. If you’re in Montclair, Claremont, Rancho Cucamonga, or Ontario, we run scheduled calls through those areas each week. Same gate-only focus, same brand knowledge, and the same upfront pricing. Call us and we’ll get your gate sorted, whether you’re on Euclid Avenue or up against the San Gabriel foothills.
Serving Upland, CA – Our Local Coverage Area
We’re based in the Upland area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Upland
Yes, in nearly every case, an Upland sliding gate that jumps the track can be repaired by resetting the track, replacing the wheels or rollers, and re-aligning the gate frame. Full gate replacement is rarely needed unless the steel frame itself is compromised or the track is embedded in failed concrete. We’ll verify the track alignment and wheel condition and give you a written quote before any work starts. Call (833) 918-6938 to schedule a track and roller inspection.
Santa Ana winds push against your gate, and the operator’s circuitry reads that resistance as an obstruction, which can trip the safety sensors and stop the gate mid-cycle. Over time, the repeated stress loosens hinge brackets and flexes weld joints, which makes the gate heavier to move and accelerates motor wear. We service the motor, sensors, and frame together so the gate operates cleanly even on gusty days.
If your Upland gate post leans more than a few degrees or the concrete around it is crumbling, the post likely needs re-footing, not just shimming or hinge adjustment. We excavate the old concrete, set the post plumb in new concrete, and re-hang the gate. Re-footing in Upland typically runs $200 to $450, and we keep the driveway usable throughout the work.
We service BFT, Linear, Viking, Ghost Controls, plus LiftMaster, FAAC, DoorKing, Elite, and Mighty Mule. Whether your Upland gate runs a residential operator or a commercial-grade system, our techs work from each brand’s own diagnostic logic. We don’t guess. We read the board, identify the fault, and replace only what failed.
Yes, we set up our work area so your driveway stays open for vehicles and pedestrians during the repair. On shared driveways, including those on older Upland blocks with rights of way, we coordinate the work so the gate is never down longer than necessary. Weld and alignment work usually happens in place, with no need to remove the gate from the property. For an Upland-specific quote, call (833) 918-6938 today.
Written by Allen Prescott, Owner at Falcon Gate Repair, serving Upland since the company’s founding.