Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Ontario
Gate repair in Ontario, CA usually costs between $165 and $480 for most residential fixes, with complete operator replacements running $850 to $2,400 depending on brand and gate size. We can typically reach homes in Ontario’s 91761 and 91764 zip codes the same day you call. Ontario’s position at the foot of the Cajon Pass puts constant wind stress on automatic gates, which means we spend more time fixing wind-cycled operators and worn rollers here than almost anywhere else in the Inland Empire. Call (833) 918-6938 and tell us what your gate is doing. Allen Prescott leads our repair team, and someone who knows gates will answer.
Why Falcon Gate Repair Is Ontario’s Preferred Gate Repair Company
We don’t juggle garage doors, fences, or general contracting work. Falcon Gate Repair is a gate-only shop, and most of the gates we repair in Ontario are builder-grade sliding and swing systems installed back when the tract subdivisions off the 60 and I-15 were first built. That means we see the same failures repeatedly: wind-packed tracks near the 91761 corridor, dry-rotted hinge posts in 1980s stucco neighborhoods, and obsolete control boards that haven’t been made in a decade. When a homeowner off Archibald Avenue or Euclid Avenue calls us about a gate that reverses for no reason, we usually know the likely cause before we roll up.
Customers in Ontario call us because we already know their operator. We work on LiftMaster, DoorKing, Elite, Mighty Mule, and the rest of the brands this region is built on. One Ontario homeowner near Ontario Mills recently assumed her sliding gate needed full replacement after a windstorm. Our tech found the track packed with grit and the rollers flat-spotted, cleared and replaced them, and had the gate running that afternoon. That’s the difference between diagnosing by brand logic and guessing.
Free estimates, upfront pricing, and the price is quoted and agreed before any work starts. Always.
Call (833) 918-6938 for a repair quote from our Gate Repair team.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Sliding Gate Repair in Ontario
Sliding gate repair in Ontario is the single most common job we do in this city, and it’s not close. The wind corridor from the Cajon Pass pushes grit and dust into slide tracks across Ontario, where it packs into the channel and forces the rollers to grind instead of roll. In ZIP 91761 especially, where homes sit directly in the path of Santa Ana events, we routinely see flat-spotted rollers, bent track brackets, and operators that strain to move a gate they used to handle easily. A typical sliding gate repair in Ontario runs $190 to $420 for track clearing, roller replacement, and operator re-adjustment.
Track Cleaning and Roller Replacement
A slide gate that drags after a windstorm usually doesn’t need a new motor. It needs the windblown grit cleared from the track and the rollers inspected. In the tract neighborhoods east of Vineyard Avenue, we replace roller sets on 15-year-old gates regularly.
Operator Hard-Start Repairs
When packed tracks make the motor work harder, the operator draws more current. That’s when older LiftMaster and DoorKing units stop mid-travel or reverse. We diagnose the operator logic directly and tell you whether the motor can be saved or if a retrofit control board makes more sense.
Wrought Iron Gate Repair in Ontario
Wrought iron gate repair in Ontario usually comes down to two things: hinge post sag and weld fatigue from wind buffeting. The original tubular-steel and wrought-iron driveway gates installed across Ontario’s 1980s-2000s subdivisions were built light, and decades of wind pushing against them have taken a toll. A sagging wrought iron gate in Ontario typically costs $230 to $500 to realign, weld, and reinforce, while a full hinge post reset can run higher. We tell you which fix is worth the money before we touch anything.
Hinge Post Realignment
Sagging gates in Ontario usually mean the post has shifted or the hinge barrel is worn, not that the gate itself is ruined. We reset posts, replace welded hinges, and re-square the gate to the opening. In dry Southern California soil, this often means re-seating the post in fresh concrete.
Weld and Rust Repair
Ontario’s dry heat bakes finishes and wind-driven grit blasts paint off the lower bars. We grind out cracked welds, re-weld them, and rust-treat the affected area. If a lower rail is too far gone, we’ll say so and quote a replacement section instead of patching something that’ll fail again.
Trusted Brands We Service in Ontario
We diagnose gate operators by manufacturer logic, not guesswork. Here in Ontario we routinely service LiftMaster, DoorKing, Elite, and Mighty Mule in Ontario, among the nine brands our technicians are factory-familiar with. When a Legacy LiftMaster board fails from heat and dust inside a stucco wall column near the 91764 industrial belt, we know which retrofit boards work and which ones don’t bother with. When a DoorKing slide operator near Ontario International Airport starts over-reversing, we check the safety loop first. We keep parts local for Ontario customers so turnaround stays fast.
Common Gate Repair Problems We See in Ontario Homes
- Wind-packed slide tracks: Santa Ana events off the Cajon Pass blow grit into tracks across 91761 and 91764, flat-spotting rollers and making operators strain. We clear tracks and re-set operators after every major wind event in Ontario.
- Obsolete control boards: Legacy LiftMaster and FAAC boards in 1990s tract homes fail from heat and dust, producing erratic gate behavior that looks mechanical but isn’t. Board retrofit is usually cheaper than a new operator.
- Sagging hinge posts: Ontario’s dry soil and constant wind stress loosen posts on original wrought-iron gates, causing sag that trips photocell faults. We reset or sister the post and re-align the gate.
- Dust-fouled photo eyes and loop detectors: The same wind-driven dust that jams rollers also coats sensors. A gate that reverses for no reason near the airport corridor is often just a dirty photo eye or a loop detector knocked out of tune.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Ontario, CA
Most sliding gate repairs in Ontario run $190 to $420. Wrought iron gate repairs, including welding, post resets, and realignment, run $230 to $500. Full operator replacements on builder-grade gates start around $850 and can reach $2,400 for heavier commercial sliding gates near the airport district. What moves the number is the operator brand, whether we are retrofitting an old system or replacing it outright, and how much wind damage the rollers and track have absorbed. Call (833) 918-6938 and Allen or one of our techs will give you a written price before work starts. Free estimates, no surprises, and the quote is always agreed before we touch the gate.
We Also Serve Cities Near Ontario
Our Gate Repair team covers Ontario plus Montclair, Upland, Chino, and Claremont. If your property is in any of these nearby cities, the same gate-only expertise applies. Call (833) 918-6938 to confirm we can reach you this week.
Serving Ontario, CA – Our Local Coverage Area
We’re based in the Ontario area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Ontario
Most of the time it’s repairable. After a Santa Ana event, the track is usually packed with grit and the rollers are flat-spotted, which makes the gate drag and the operator strain. We clear the track, replace the rollers, and re-set the operator limits. That typically costs $190 to $320 in Ontario. Call (833) 918-6938 for an exact quote.
If the motor and gearbox still run clean, we can almost always retrofit a modern control board and new photo eyes onto an older LiftMaster, DoorKing, or FAAC operator. The board is what fails, not usually the motor itself. We’ll inspect yours and tell you honestly whether retrofitting saves money or if replacement is the cheaper long-term answer. Call (833) 918-6938 and we’ll take a look.
Sag usually means the hinge post has shifted or the hinge barrels are worn, not that the gate is ruined. In Ontario’s dry soil and wind corridor, posts loosen over decades of buffeting. We reset the post, replace the hinges, and re-square the gate, usually for $230 to $500. Full replacement is rarely necessary. Contact us at (833) 918-6938 for a free assessment.
We service LiftMaster, DoorKing, Elite, Mighty Mule, FAAC, BFT, Linear, Viking, and Ghost Controls. That covers the builder-grade operators in Ontario’s older tract subdivisions through the commercial units near Ontario International Airport. We work on your brand specifically, not as a side job.
Dust storms from the Cajon Pass corridor foul photo-eye lenses and can knock loop detectors out of tune, especially in the industrial lots near the airport. We clean and re-aim the sensors, test the loop frequency, and re-program the keypad if needed. The fix runs $120 to $260 in Ontario. Call (833) 918-6938 for a same-day visit.
Call Falcon Gate Repair for Gate Repair in Ontario, CA
If your gate is dragging, sagging, reversing, or just stopped working, call Falcon Gate Repair at (833) 918-6938. We’re gate-only specialists serving Ontario and the surrounding cities, and we’ll give you an honest quote before any work begins. Allen Prescott and our technicians know the wind damage, worn rollers, and aging operators this city deals with. Call now for a free estimate.
Written by Allen Prescott, Owner at Falcon Gate Repair, serving Ontario and the Inland Empire.