Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Fontana, CA
Gate installation in Fontana means choosing hardware that survives Santa Ana dust, alkaline water, and soil that moves. We’re Falcon Gate Repair, and we install, repair, and maintain swing gates, slide gates, and automated operators across 92334, 92335, 92336, and 92337. Whether you’re replacing a sagging RV gate in a north-end subdivision or putting an access control barrier on a warehouse yard off the 10, call (833) 918-6938 for a free measure and written quote.
Why Fontana Homes Are Different
Fontana’s gate work splits two ways. South of the 10, in the older postwar tract neighborhoods around 92335, houses still have original single-vehicle driveways and narrow side yards. Gates there are often 30 or 40 years old, welded steel with worn hinges and no automation. North of Summit Avenue, in the 1990s and 2000s master-planned communities in 92336, the picture changes completely: double-wide driveway gates and RV gates are the norm, built around the boat and RV parking culture that defines that part of the city.
The soil up north is sandy and expansive. It swells and shrinks with the dry heat and occasional heavy rain, and that movement slowly pulls gate posts out of plumb. A gate that worked fine for years starts scraping the ground or latching short. Down south, the bigger enemy is age and the Santa Ana wind corridor. Dust gets into bearing housings, operators, and hinges. The alkaline local water accelerates rust on steel and wrought iron. None of this is a surprise to us anymore. It’s Fontana-specific, and we plan for it on every install and repair call.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Fontana Services
Fontana homeowners and property managers call us most often for two things: fixing a gate that has stopped working, and repairing the electric system that automates it. Both are covered below with dedicated pages for Fontana.
Gate Repair in Fontana
Mechanical gate repair in Fontana is usually one of three things: a hinge that has pulled loose from a shifting post, a wheel or roller worn out from years of dust and heat, or a steel frame that has rusted through at the bottom rail. In the north-end subdivisions, we see soil movement cause the sag. In the older south end, we see fatigue and corrosion. We repair on-site, carry the common hardware, and quote the full price before work starts. Our Fontana page covers repair pricing, same-day availability, and the signs your gate needs attention before it fails completely: Gate Repair in Fontana.
Electric Gate Repair in Fontana
Electric gate problems in Fontana fall into a few predictable groups: dead motors, failed control boards, blown capacitors, keypads that won’t respond, and loop detectors that stop sensing vehicles. Dust intrusion shortens the life of motors and circuit boards here, and heat cycles stress capacitors every summer. Our techs work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so we diagnose by brand logic rather than trial and error. Full detail on diagnostic calls, board replacement, and access control repair is on our dedicated page: Electric Gate Repair in Fontana.
Gate Installation in Fontana
Gate installation in Fontana is not a one-size-fits-all operation. A double-swing RV gate in the sandy soil of 92336 needs deeper posts and stronger hinges than a decorative pedestrian gate in a shaded 92335 backyard. A commercial slide gate on a truck yard off Slover Avenue has a completely different duty cycle than a homeowner’s automated driveway gate. We design for the specific site: soil, exposure, gate width, automation level, and how many cycles the operator will run per day. We handle both the steel and the electronics, so you never need to coordinate two companies on the same project. Falcon Gate Repair installs and services gates from entry-level residential brands like Ghost Controls up through BFT, Linear, and Viking, and every install includes a written quote agreed before work begins. You can read more about our full installation scope on the Gate Installation page.
Automatic Gate Installation
Signs you need it
A gate you’re opening and closing by hand many times a day, or a gate you’re leaving open because manual operation is too much trouble, is the clearest sign an automatic operator will pay for itself.
What it costs in Fontana
Automatic operator installation in Fontana typically runs from $1,200 to $4,500, depending on the operator brand, gate weight, and whether wiring already exists at the site.
How we do it
We measure the gate leaf and weight, match an operator to the duty cycle, then pull wire, set the operator, install safety photo eyes and loops where needed, and program the remotes and keypad on site.
Driveway Gate Installation
Signs you need it
A driveway gate that leans, scrapes, or no longer closes square is past patching, and replacing it is often cheaper than repeated weld-on repairs.
What it costs in Fontana
A new driveway gate in Fontana, installed with posts and hardware, generally runs from $1,800 to $9,000 depending on width, material, and whether you’re adding automation at the same time.
How we do it
We remove the old gate and posts, set new steel posts in concrete at the correct depth for Fontana’s expansive soil, hang the gate with adjustable hinges, and fine-tune the swing so it closes true.
Sliding Gate Installation
Signs you need it
You need a sliding gate when the driveway slopes or curves, or when there isn’t room for a swing gate to open inward or outward without hitting vehicles or walls.
What it costs in Fontana
Sliding gate installation in Fontana typically runs from $2,500 to $12,000, with the higher end covering heavy cantilever gates for commercial and industrial yards.
How we do it
We pour the gate foundation and track bed, set the track or cantilever rollers, mount the gate and operator, and test the limit switches and safety edges until the gate glides without binding.
Electric Gate Installation
Signs you need it
You need a full electric gate installation when you’re adding both a gate and automation to a property that has never had either, or when your existing manual gate needs a complete automation retrofit.
What it costs in Fontana
Complete electric gate installation in Fontana, including the gate, operator, posts, keypad, and one remote, ranges from $2,000 to $8,000 for most residential sites.
How we do it
We survey the driveway, set posts and hang the gate, mount the operator, run low-voltage wire from the house or a dedicated circuit, install photo eyes and a keypad, and program every remote on site.
What Gate Installation Costs in Fontana
| Item | Typical range in Fontana |
|---|---|
| Automatic operator installation (labor included) | $1,200 – $4,500 |
| Driveway gate with posts and hardware | $1,800 – $9,000 |
| Sliding gate installation | $2,500 – $12,000 |
Prices in Fontana move up with gate width, ornamental steel work, and whether we’re trenching power across a long driveway. But every quote is fixed in writing before we start, and if the site reveals something unexpected, you approve any change before we touch it.
How long does gate installation take in Fontana?
Most residential driveway gate installations take one to two days. Heavier commercial slide gates or automation jobs that need trenching and new electrical runs can stretch to three or four days, and we’ll tell you the schedule in writing before the job starts.
Do I need a permit for a gate in Fontana?
Most residential driveway gates in Fontana don’t require a permit, but automated gates sometimes need an electrical permit depending on how power is run. We handle the permitting conversation with the city when it comes up, so you’re not left guessing.
Brands We Service in Fontana
We work on BFT, Linear, Viking, and Ghost Controls systems every month in Fontana, and we keep the most common boards, remotes, and safety parts in local stock so repair calls don’t stall on shipping. When a board is obsolete or a motor has burned out, we quote replacement or retrofit options the same day. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Fontana, CA
These are the ranges we quote daily across Fontana. They cover the common jobs, with labor included, and every quote is fixed in writing before any work starts.
| Service | Typical range in Fontana |
|---|---|
| Gate opener (operator) installation | $1,200 – $4,500 |
| Swing gate installation | $1,800 – $9,000 |
| Sliding gate installation | $2,500 – $12,000 |
| Hydraulic swing gate operator | $3,000 – $7,000 |
| Hydraulic slide gate operator | $3,500 – $8,000 |
| Commercial slide gate installation | $8,000 – $15,000 |
| Gate opener circuit board replacement | $400 – $900 |
| Safety loop replacement (per loop) | $600 – $1,000 |
Commercial and industrial gates, especially heavy slide gates on the warehouse belt, push toward the top of these ranges because the steel, track, and operators are heavier and spec’d for high cycle counts. Residential jobs in the north end sometimes come in higher than the baseline when the post footings need to go deeper to hold in Fontana’s expansive soil – and we’ll show you exactly where every dollar goes before we dig.
Neighborhoods We Serve in Fontana
We run service calls across all four Fontana ZIP codes, from the older blocks near downtown to the newer tracts up against the 210. We quote arrival windows honestly, not as marketing language, and most repair calls are scheduled same-day or next day.
- Downtown Fontana / old 92335 core
- North Fontana subdivisions along 92336
- Southridge and the 92337 side
- West End near the 92334 corridor
- The warehouse and industrial belt off the 10 and I-15
Service Area – Cities Near Fontana
Our service area extends through the neighboring Inland Empire cities, so if your property sits close to the Fontana line, one call usually covers it. We work regularly in Jurupa Valley, CA, Rancho Cucamonga, CA, Ontario, CA, and Upland, CA, and we schedule those routes together to keep response times tight.
Serving Fontana, CA – Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fontana
For a down or unsafe gate, we dispatch same-day in most of Fontana. Installation and new construction quotes are scheduled for a measured site visit that typically happens within a few business days. Call (833) 918-6938 and we’ll give you a straight arrival window.
Some of the master-planned communities in North Fontana do have HOA design standards for driveway gates, usually covering height, color, and whether the gate is solid or ornamental. We’ve worked inside those rules enough to know which questions to ask before you buy materials, and we’ll confirm compliance before the install.
Yes. Slide gates, yard enclosures, and high-cycle automated access points on the distribution belt are everyday work for us, and our technicians are trained on the commercial-grade operators those sites use: FAAC, BFT, DoorKing, and Linear among them.
Falcon Gate Repair has served Fontana since 2018. Call (833) 918-6938 for a free estimate on gate repair, electric gate repair, or a new gate installation.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Fontana Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Elena Martinez"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Alicia Carter"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Adam Sullivan