Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Upland, CA
Falcon Gate Repair installs and services automatic gate systems across Upland, and the work here has a distinct character. We see far more sagging wrought-iron gates on 1950s ranch homes and citrus-era bungalows than brand-new builds. The dry heat and Santa Ana winds bend frames, crack old concrete footings, and wear out opener motors faster than homeowners expect. If you need a new gate or your current one won’t close, call (833) 918-6938 for a straight answer and a free estimate.
Why Upland Homes Are Different
Upland’s housing stock tells the story. The neighborhoods between Euclid Avenue and San Antonio Avenue, especially around downtown, are filled with homes built between the 1920s and 1950s, when citrus groves still covered much of the city. Those properties typically have original or second-generation wrought-iron and tubular-steel driveway gates, many of which have been repainted three or four times over the decades. Beneath the paint, the steel is often rusting at the hinge posts, and weld joints that were forged when Eisenhower was president are now beginning to separate.
The climate accelerates the wear. Hot, dry summers shrink the wood posts on older wood-rail gates, pulling lag bolts and hinge screws loose. When the Santa Anas blow through in the fall, an unlatched gate slams hard against its stop, bending the frame and knocking the operator’s limit settings out of alignment. Then the winter rains arrive and find every cracked weld and bare metal edge, pushing rust deeper. On the older streets near downtown, we routinely find gate posts set in original concrete footings that spider-cracked years ago. A leaning post in Upland usually means re-footing, not just a hinge adjustment.
Newer homes north of the 210, toward the foothills, present a different set of jobs: vinyl and ornamental steel gates with modern openers, often tied into home automation. Those systems fail differently, usually at the control board or the safety sensors rather than the hinges. Falcon Gate Repair has served Upland since 2018, and the variety of gate stock across this city means our techs have seen nearly every failure mode the Inland Empire can produce.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Upland Services
Most calls from Upland homeowners fall into two buckets: a gate that won’t open or close properly, or a motorized system that has stopped responding entirely. Here’s how each plays out locally.
Gate Repair in Upland
Mechanical gate repair in Upland is dominated by rust, sagging, and out-of-square frames on older properties. Hinge posts pull away from cracked footings, weld joints crack under decades of sun and Santa Ana stress, and casters on sliding gates wear flat spots. Our techs cut out rusted sections, re-weld joints, re-set posts in fresh concrete, and realign frames so the gate swings true again. One local condition matters more than any other: the repainting cycles on Upland’s older iron gates hide rust underneath. We strip back to bare metal before welding, because a weld on painted-over rust won’t hold through the next winter. Gate Repair in Upland covers the full mechanical scope.
Electric Gate Repair in Upland
When an opener hums but the gate doesn’t move, or the keypad accepts the code and nothing happens, the problem is usually in the motor, the control board, or the safety loop. Upland’s dry air is hard on circuit boards, and the heat inside a metal operator housing can cook capacitors over a single summer. We carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so most repairs happen on the first visit rather than after a week of waiting on a distributor. Electric Gate Repair in Upland is a core service, not an upsell.
Gate Installation in Upland
Gate installation in Upland usually means replacing something that was built when the house was built. The older streets near downtown have post footings poured in the 1940s and 1950s that are now cracked, and the gate frames themselves are often rusted beyond the point where welding makes sense. Our install team removes the old gate, pours new footings when the existing ones won’t hold, sets the posts, hangs the new gate, and dials in the opener so the limit settings match the exact swing or slide path. Gate Installation runs from simple manual replacements to full automatic systems with keypads and safety loops.
What changes the job in Upland is the soil and the heat. Dry, compacted soil holds concrete differently than coastal ground, and a post set without enough depth will lean within two years. We set posts below the shrink-swell zone and use concrete mix suited to the Inland Empire’s dry climate. For automatic gates, we also account for the sun: a black control box mounted in direct afternoon sun on a foothill property will cook its own electronics. We angle housings for shade wherever the driveway allows.
Automatic Gate Installation
Signs you need it
You’re getting out of the car twice a day to swing the gate open by hand, and that’s twice too many.
What it costs in Upland
A full automatic swing gate system on an existing, solid gate frame runs $2,500 to $7,000, while a sliding gate system with operator typically lands between $3,000 and $8,500 depending on track, motor, and safety-loop configuration.
How we do it
We verify the posts and hinges will carry the motor load, mount the operator, run power to the motor, install the safety loops and keypad, then program the limit settings and test the obstruction reverse.
Driveway Gate Installation
Signs you need it
Your current driveway gate sags on its hinges and scrapes the concrete every time the wind pushes it.
What it costs in Upland
A new manual driveway gate in steel or aluminum typically ranges from $1,200 to $5,000, while a motorized driveway gate system runs $3,500 to $9,500 when you factor in the operator, safety edges, and wiring.
How we do it
We pull the old gate and posts, pour or extend footings, set new posts plumb and square, hang the new gate, and attach the opener with all safety hardware if the job includes automation.
Sliding Gate Installation
Signs you need it
Your property has a narrow driveway or a steep approach where a swing gate can’t open without hitting a wall or a slope.
What it costs in Upland
A cantilever sliding gate system with a motorized operator and safety devices typically runs $3,500 to $8,500, with the final number driven by gate length, track style, and access-control options.
How we do it
We set the track and roller trucks, hang the sliding gate, mount the operator at the correct height, run the power and loop detectors, and tune the soft-start and soft-stop settings.
What Gate Installation Costs in Upland
| Item | Typical range in Upland |
|---|---|
| Manual driveway gate (steel/aluminum, no opener) | $1,200 – $5,000 |
| Automatic swing gate system (full installation) | $2,500 – $7,000 |
| Sliding gate with operator and safety devices | $3,000 – $8,500 |
These figures reflect Upland’s mix of older custom iron gates and newer prefabricated steel systems. The biggest price movers are footing repair on old posts, motor brand, and the distance from the nearest power source to the operator. Every quote is agreed in writing before any work starts.
How long does a gate installation take in Upland?
Most standard driveway gate replacements take one to two days from removal to final programming. Automatic systems with new concrete footings may need an extra day for cure time before the opener is mounted.
Do you handle the wiring and safety sensors on a new automatic gate?
Yes. The power run, control wiring, keypad, safety loops or photo eyes, and edge sensors are all part of our installation scope. Contact us at (833) 918-6938 for a written quote.
Brands We Service in Upland
We work on BFT, Linear, Viking, and Ghost Controls systems regularly in Upland, along with the rest of our nine-brand lineup. Because gate operators vary in board logic and motor behavior, we stock brand-specific parts and components locally so most repairs don’t wait on a distributor shipment. Check our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Upland, CA
| Service | Typical range in Upland |
|---|---|
| Manual driveway gate (steel/aluminum, no opener) | $1,200 – $5,000 |
| Automatic swing gate system (full installation) | $2,500 – $7,000 |
| Sliding gate with operator and safety devices | $3,000 – $8,500 |
| Gate opener motor replacement | $650 – $2,500 |
| Control board replacement | $550 – $1,500 |
| Hinge replacement (wrought iron or steel) | $250 – $1,200 |
| Gate wheel or roller replacement | $180 – $700 |
| Weld repair (per weld joint) | $150 – $450 |
| Post re-setting or new concrete footing | $300 – $1,200 |
| Keypad or intercom replacement | $350 – $1,700 |
| Safety loop or photo eye replacement | $250 – $800 |
| Gate off-track or realignment service | $200 – $600 |
In Upland, the two things that push a repair bill upward are hidden rust behind old paint and footings that have crumbled around the post. Both mean more labor than a simple parts swap, and both are common on the older streets near downtown. We quote every price before any work starts, so there isn’t a surprise line item after the fact.
Neighborhoods We Serve in Upland
We run service calls across the whole city, but the character changes depending on where you live. Downtown and the historic citrus-era blocks keep us busy with rust repair and re-footing jobs. The tract neighborhoods from the 1960s and 70s generate a steady flow of opener motor and control board replacements. The foothill subdivisions north of the 210 bring newer vinyl and ornamental steel systems with home-automation tie-ins. Our typical response window across Upland is same-day or next-morning for most repair calls.
- Downtown Upland and the citrus-era streets
- North Upland foothill subdivisions
- San Antonio Heights area
- West Upland near the Claremont border
- South Upland around the 10 freeway corridor
Service Area – Cities Near Upland
Falcon Gate Repair covers the surrounding Inland Empire as well. We regularly work in Montclair, CA, Claremont, CA, Rancho Cucamonga, CA, and Ontario, CA. The housing stock varies across these cities, but the gate problems stay mostly the same: rust, sagging, and opener failures.
Serving Upland, CA – Our Local Coverage Area
We’re based in the Upland area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Upland
For repair calls, we typically arrive same-day or next morning depending on the time you call and where you are in the city. Installation work is scheduled in advance, usually within the week. Call (833) 918-6938 to check today’s availability.
Most residential gate replacements don’t require a permit, but if your property is in an HOA-governed community, the association may have design rules about materials, height, and color. We can build to match existing specs. Always check your HOA covenants before choosing a finish.
Yes. On Upland’s older streets, many homeowners want a replacement that looks like the original 1950s ironwork. We can duplicate the general profile and finish of your current gate while building it with modern steel that resists rust better than the original. The result blends with the neighborhood rather than standing out.
If your gate is sagging, rusting, or won’t answer the keypad, call Falcon Gate Repair at (833) 918-6938. We know Upland gates, we stock the parts, and we quote the price before we start.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Upland Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Adam Sullivan"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Ryan Doyle"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
- Norma Herrera