Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Claremont
Electric gate repair in Claremont typically runs $185 to $390 for most motor, control board, and safety sensor fixes, and we can usually have a technician to your driveway the same day you call. Falcon Gate Repair is a gate-only specialist serving Claremont, and we work on the operator brands already installed across this city’s older neighborhoods, from original LiftMaster units on 1950s carriage gates to FAAC and BFT systems on newer Village-area properties. If your gate is stuck, grinding, or refusing to close, call (833) 918-6938 and we’ll diagnose it over the phone before we even roll a truck.
Allen Prescott leads our team, and he set Falcon up with one rule: know the brand before you touch the gate. That matters in Claremont because so many of the city’s automated gates are legacy systems hung decades ago, and the wrong diagnostic guess wastes your afternoon and your money. We serve every Claremont neighborhood, from the historic core around the Claremont Colleges to the 91767 tracts up toward the foothills. Call (833) 918-6938 for a free estimate.
Why Falcon Gate Repair Is Claremont’s Preferred Electric Gate Repair Company
Claremont homeowners call us because we speak the language of the operator on their property. Most garage-door companies that also “do gates” carry a generic parts kit and hope for the best. We arrive knowing whether your DoorKing, Linear, or older LiftMaster board is worth repairing or has reached end-of-life. That distinction alone saves Claremont residents from paying for a repair that fails again six months later.
Our reputation across Claremont comes from showing up prepared and quoting the work before anything gets disassembled. Homeowners near Memorial Park and the Village have told us the same thing: the gate was diagnosed in under an hour, the price matched the quote, and the explanation made sense. We don’t withhold information to pad the invoice. When a control board is truly dead, we say so plainly and give you the honest cost to repair versus replace.
Claremont’s housing stock rewards technicians who understand old construction. Homes built in the teens and twenties have post footings set with methods nobody uses today, and gates hung on those posts behave differently than a 2010 tract-home aluminum gate. That’s the kind of local knowledge you can’t schedule; you only get it from years of working on actual Claremont properties. We’re a local, gate-focused company led by Allen Prescott, and every service call we run in Claremont is treated like it’s on our own block.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Access Control in Claremont
Gate access control in Claremont means the difference between a gate that opens for anyone with a remote and a gate that only opens for people you’ve authorized, whether that’s a keypad at the curb, a card reader at a gated parking lot near the colleges, or a phone app for a rear-alley carriage gate off an historic home’s service drive. We install, repair, and retrofit every layer of it, from the keypad and reader to the control board and the lock that actually holds the gate closed. In a college town where rental turnover is constant and property managers need to revoke access the moment a lease ends, access control hardware takes a real beating.
Keypad and Intercom Systems
Claremont homeowners and landlords around 91711 frequently call us about keypads that have stopped accepting codes, often because exposure to full foothill sun has degraded the membrane or corroded the contacts. We replace the keypad wiring and housing, reprogram the codes, and confirm the signal reaches the board cleanly. If you’re managing a rental near the Claremont Colleges, we can set up multiple user codes so you’re not sharing one admin code with every tenant.
Card Readers and Telephone Entry
For small commercial gates and gated parking areas in Claremont, a failing card reader can lock employees or tenants out at the worst possible time. We service the readers, the power supply, the controller, and the wiring in between. When the existing reader can’t be repaired, we quote you a compatible replacement before any work begins so you know the total cost up front.
Commercial Gate Operator in Claremont
A commercial gate operator in Claremont has to earn its keep daily, from gated lots serving the colleges to apartment and condominium entry gates along Foothill Boulevard. These units run heavier cycles than any residential operator, and when a commercial operator fails, it’s not an inconvenience: it’s tenant access, deliveries, and emergency vehicles all bottlenecked at the entrance. We repair and replace commercial operators across the full range we service, from FAAC and BFT to DoorKing and Viking, and we stock the common boards and safety loop detectors to keep downtime measured in hours, not days.
Slide and Cantilever Gates
Commercial slide gates in Claremont’s commercial corridors take the most abuse from daily traffic and the occasional strike. The failure points are predictable to us: worn rollers, damaged track, tripped safety loops, and motors overheating from drag. We inspect the entire travel path, not just the motor, because a slide gate that’s fighting a bad roller will burn out a new operator within a year.
Safety Loop and Photocell Upgrades
Claremont commercial properties with older operators often lack the safety equipment current code expects. We retrofit photocells and vehicle detection loops onto existing operators so the gate stops and reverses when a car or person is in the path. This is not optional add-on work; it’s the part of the job that prevents injury and liability.
Trusted Brands We Service in Claremont
We’re factory-familiar with the operator brands already installed across Claremont, so we diagnose by brand logic rather than guesswork. That includes FAAC and BFT hydraulic and electromechanical units on larger gates, Linear and Viking systems on commercial properties, and the LiftMaster and DoorKing boards that appear across the city’s residential stock. We also carry common Claremont-specific parts on our trucks, which is why we can often complete a board swap or safety sensor repair the same day rather than ordering a part and returning a week later. Call (833) 918-6938 and tell us the brand on your operator; we can usually tell you over the phone what’s likely wrong.
Common Electric Gate Repair Problems We See in Claremont Homes
- Wind-loosened hinge post footings. Santa Ana winds coming down from the San Gabriels put lateral pressure on swing gates, and older footings set in decomposing granite loosen over time. A gate that sags a half inch after a wind event can bind against the operator and trip safety faults constantly.
- Obsolete control boards doing nothing at all. Voltage spikes during wind season take out old LiftMaster and FAAC boards that were already running on borrowed time. The symptom is a dead keypad, no motor response, and a gate stuck wherever it was when the board failed.
- Wood gates that swell, drag, and cook in the sun. Claremont’s hot, dry summers plus UV at 1,200 feet of elevation dries out solid-wood gates until the stiles split. Then the winter rains swell the wood and the gate drags on the latch post, stressing the operator every cycle.
- Phantom obstructions from misaligned sensors. A gate that starts closing then reverses for no obvious reason is usually a photocell or safety edge issue, and in older Claremont homes the problem is often wiring that’s been soaking in underground conduit for 40 years. We trace the wire and find the actual break rather than replacing parts on a hunch.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Claremont, CA
Here are the ranges we typically see in Claremont. Gate motor repair runs roughly $220 to $420 depending on whether it’s a capacitor, limit switch, or full motor replacement. Control board replacement is $280 to $550 for most residential brands, with some commercial FAAC and BFT boards running higher. Keypad replacement or reprogramming is $95 to $220. Safety sensor (photocell) repair is $120 to $260. Remote control programming or replacement is $75 to $180. Full operator replacement, which sometimes makes more sense than repairing a 25-year-old unit, runs $950 to $2,400 installed depending on brand and gate weight. Every job is quoted and agreed before work starts, so the number on your invoice matches the number we gave you up front. Call (833) 918-6938 for a free estimate on your specific gate.
We Also Serve Cities Near Claremont
Falcon Gate Repair runs calls across the eastern San Gabriel Valley. Our Electric Gate Repair team regularly serves La Verne, Montclair, Upland, and Pomona, so if you manage properties in several cities, you’re dealing with one gate-specialist phone number. More on our local coverage: Electric Gate Repair in Claremont.
Serving Claremont, CA – Our Local Coverage Area
We’re based in the Claremont area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Claremont
Yes. We regularly retrofit modern photocells, safety edges, and control boards into original wood gates on Claremont’s historic properties, and we do it so the visible hardware stays period-appropriate. We can recess sensors into the frame, run conductors through the existing post rather than surface-mounting conduit, and choose operator arms with a low profile that doesn’t distract from the original gate work. If your home is in a designated historic district or on the historic-resource inventory, we’ll talk through what design review may expect before any hardware gets ordered. Call (833) 918-6938 and describe your gate; it’s easier to give you the right answer once we know the style and operator.
The most likely cause is the hinge post footing loosening, not the operator. The wind loads push on the gate, and if the post moves even a quarter inch, the gate sags and drags on its latch side, which makes the operator work against extra resistance every cycle. We see this across Claremont after wind events, especially on older solid-wood gates in the college-area neighborhoods. We re-set the post, check the hinges, and only then test the operator, because fixing the drag first tells us whether the motor was actually damaged. Call (833) 918-6938 and we’ll schedule a wind-damage inspection.
Most operator repairs, board replacements, and safety-sensor retrofits don’t require a permit in Claremont, because you’re working on equipment, not structure. Replacing the gate itself, moving a post, or running new underground power can trigger review, and if the property is in a historic district or on the historic-resource inventory, design-review approval may apply before visible changes. We’ll be straight with you about what likely applies to your property, and we can advise on hardware choices that review boards accept. When in doubt about a specific repair, call (833) 918-6938 and we’ll give you our read before you spend anything.
If the board is still manufactured, repair. If it’s been discontinued for more than about eight years and you’re now buying used parts from online auctions, replacing the operator is usually the cheaper move within two years. Used boards in legacy LiftMaster and FAAC units fail the same way the original did, and you’ll pay for labor twice. We’ll quote the repair cost and the replacement cost side by side in Claremont, then you decide. The replacement quote includes the new operator, installation, safety equipment, and removal of the dead unit, and we stick to the number we gave you before work starts.
Hot, dry summers and Santa Ana winds dry out and warp wood gate frames, which strains hinges and operators, while UV at this elevation fades and checks finishes on sun-facing gates faster than in coastal cities. Then the winter rains swell the wood and any misalignment gets worse, which is why a gate that dragged in January may swing freely by July and why your operator might struggle seasonally. We recommend checking gate alignment twice a year in Claremont, once after wind season and once after the first real rain, and we can handle both checks on a single service call. Call (833) 918-6938 to schedule a seasonal inspection.
Call Falcon Gate Repair for Electric Gate Service in Claremont
If your Claremont gate is down, noisy, or refusing to close, call (833) 918-6938 for a free estimate. Allen Prescott and our gate-only technicians know the brands, the weather, and the houses in this city, and we quote every repair before we start. From the motor to the control board, repair or replace, we handle both.
Written by Allen Prescott, Owner at Falcon Gate Repair, serving Claremont and the eastern San Gabriel Valley.