Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Claremont, CA
Gate installation in Claremont usually costs between $1,900 and $9,500 depending on whether you need a standard chain-link or tube-steel gate or a full automated wrought-iron or wood system with an operator, keypad, and safety loops. Homes here at the base of the San Gabriel Mountains are older, historically significant, and exposed to Santa Ana winds, which means installation work has to account for wind load, period detailing, and soils that shift between wet winters and bone-dry summers. At Falcon Gate Repair, we install and service gates in both 91711 and 91767, and you can reach us at (833) 918-6938 for a free estimate.
Why Claremont Homes Are Different
Claremont isn’t a generic suburban grid. The 91711 side near the colleges is packed with early-20th-century Craftsman and Spanish Colonial Revival homes, many with rear-alley carriage gates, walled pool yards, and original wood and wrought-iron gates that sit on the city’s historic-resource inventory. On those streets, you don’t swap an original gate for a stock aluminum panel without running into design-review expectations, and a good installer knows the difference between preserving period hardware and replacing it outright.
The climate does its own damage. Hot, dry summers and fall Santa Ana winds pull moisture out of wood until it checks, splits, and sags. Then winter rains swell the same wood, so a gate that dragged in January might swing clear by July, and hinges that were snug all summer are suddenly loose. Wind events coming down off the mountains are especially hard on gate posts: footings that were adequate for calm weather start working loose after a season or two of repeated gusts. Upland-adjacent properties in 91767 tend to be newer mid-century and tract homes with standard chain-link and aluminum gates, where the job is more about straight posts, smooth tracks, and long-term alignment than it is about matching historic detailing.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Claremont Services
Most Claremont calls to Falcon Gate Repair fall into two buckets: gates that have stopped working, and electric systems that have lost their automation. Both are covered here.
Gate Repair in Claremont
A sagging wood gate in the Claremont Village or a rattling chain-link gate off Base Line Road usually comes down to hinges, posts, or hardware that’s moved. We repair what’s there first: re-hanging, reinforcing, replacing hinges and rollers, and pre-drilling old dry wood so it doesn’t split. In the older college-area neighborhoods, original solid-wood gates often need reinforcement before they’re re-hung, because decades of Claremont sun leave the wood too brittle for fresh screws. See our full Gate Repair in Claremont page.
Electric Gate Repair in Claremont
When an automated gate stops opening, it’s usually the operator, the control board, a safety loop, or a keypad that’s failed. We diagnose by brand logic, which matters here because Claremont gates run everything from basic Mighty Mule and Ghost Controls units on residential driveways to heavier FAAC, BFT, and DoorKing operators on multi-unit properties. Wind-related strain on gate motors is common in the fall. We cover the full electrical side: motors, boards, loops, remotes, and keypads. See our Electric Gate Repair in Claremont page.
Gate Installation in Claremont
Gate installation in Claremont has to solve for two local conditions at once: century-old properties with historic fabric and newer tract homes where the priority is a straight, secure, low-maintenance gate. Whether you’re replacing a rotted wood driveway gate in 91711 or adding a first-time automated sliding gate to a 91767 property, the job starts with measuring the opening, checking post depth and wind exposure, and quoting a firm price before any work begins. Falcon Gate Repair has served Claremont since 2018, and our Gate Installation crew handles everything from a basic tube-steel manual gate to a full electric system with access control.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to open the gate every time, or you want controlled access to a rear yard, pool area, or driveway that’s currently unsecured.
What it costs in Claremont
Automatic gate installation in Claremont typically runs $2,500 to $7,500 for a complete system with gate, operator, keypad, and safety edges, with the higher end covering long iron or steel driveway spans and dual operators.
How we do it
We mount the operator to a reinforced post or pedestal, set the gate leaf level with proper hinge clearance, wire the motor and control board, set limits, and install safety loops, photo eyes, and a keypad before testing the full open-close cycle.
Driveway Gate Installation
Signs you need it
Your current driveway gate is rotted, leaning, dragging on the concrete, or too narrow for modern vehicles and delivery trucks.
What it costs in Claremont
Driveway gate installation in Claremont typically costs $1,900 to $3,900 for a manual metal gate, $3,000 to $7,500 for an automatic single swing gate, and $5,000 to $9,500 for a long automatic sliding or double-swing driveway gate in steel or wrought iron.
How we do it
We set new posts below frost depth with proper concrete footings, fabricate or order the gate to the exact opening width, hang it level, and if it’s automated, we run the power, mount the operator, and set travel limits and safety loops before testing it with remotes and the keypad.
What Gate Installation Costs in Claremont
| Item | Typical range in Claremont |
|---|---|
| Standard chain-link or tube-steel gate | $500 – $1,500 |
| Manual driveway gate (metal) | $1,900 – $3,900 |
| Automatic single swing gate system | $3,000 – $7,500 |
| Automatic sliding driveway gate (steel or wrought iron) | $5,000 – $9,500 |
Do you handle the power run and safety edges for an automatic gate in Claremont?
Yes. Every automatic gate installation includes the electrical run from the panel, the operator, safety loops or photo eyes, safety edges, and the keypad or access system. We don’t leave a gate powered until the safety devices are tested. Call (833) 918-6938 for an exact quote.
Do I need Claremont city permits for a new driveway gate?
If the gate crosses a public easement or exceeds height and setback rules, the City of Claremont may require a permit, and homes in historic districts can face additional design-review requirements. We’ll tell you honestly before any work starts what your project needs, and estimates are free.
Brands We Service in Claremont
We service the operators Claremont homeowners actually own. Our technicians are factory-familiar with FAAC, BFT, Linear, and Viking systems, among others, and we diagnose by each brand’s control-board logic rather than guessing. That means faster diagnosis and fewer return trips. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Claremont, CA
| Service | Typical range in Claremont |
|---|---|
| Chain-link / tube-steel gate repair | $150 – $450 |
| Wood gate repair (re-hang, hinges, reinforcement) | $200 – $600 |
| Automatic opener gear / arm replacement | $350 – $800 |
| Control board replacement | $400 – $1,000 |
| Safety sensor / photo eye replacement | $150 – $350 |
| Keypad / intercom / receiver replacement | $200 – $500 |
| Standard chain-link or tube-steel gate | $500 – $1,500 |
| Manual driveway gate (metal) | $1,900 – $3,900 |
| Automatic single swing gate system | $3,000 – $7,500 |
| Automatic sliding driveway gate | $5,000 – $9,500 |
In Claremont, the two things that push price up most are long driveway spans that need heavier steel or dual operators, and historic-district projects where the gate has to match period detailing and pass design review. Smaller chain-link and wood re-hang jobs sit at the low end. Every job is quoted and agreed before we start, and there’s no surprise invoice at the end.
Neighborhoods We Serve in Claremont
Falcon Gate Repair covers all of Claremont, from the historic college-area streets around Scripps and Pomona Colleges to the newer tracts and mid-century homes further north and west. We’re typically on-site anywhere in the city within one to two business days for scheduled work, and faster for a gate that’s stuck open or won’t close.
- The Claremont Village and historic core (91711)
- College-area neighborhoods near Pomona, Scripps, Claremont McKenna, Harvey Mudd, and Pitzer
- North Claremont and the 91767 tract-home areas
- Base Line Road and Foothill Boulevard corridors
- Claraboya and the hillside-adjacent streets at the base of the San Gabriels
Service Area – Cities Near Claremont
Claremont sits at the eastern edge of Los Angeles County, and our gate work regularly takes us into the neighboring cities that wrap around it. We serve La Verne, CA to the east, Montclair, CA to the south, and Upland, CA to the west, which is also home to our primary shop. We also handle gate repair and installation in Pomona, CA for properties near the Claremont-Pomona boundary.
Serving Claremont, CA – Our Local Coverage Area
We’re based in the Claremont area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Claremont
For a gate that’s stuck open, won’t close, or is blocking access, we prioritize the call and can usually reach most Claremont addresses within one business day, often the same day if the call comes in early. A gate left open is a security problem, so we treat it as urgent. Call (833) 918-6938 and tell us what the gate is doing.
Yes, in the older 91711 neighborhoods and any property on Claremont’s historic-resource inventory, replacement gates and even major repairs can be subject to design-review standards that favor period-appropriate materials and detailing. We’re familiar with those expectations and can help you plan a gate that satisfies the city and still works like a modern system.
Every job gets a written price before we start, and we don’t begin until you’ve approved it. That’s true for a $200 hinge repair and a $9,000 automated driveway gate installation. Estimates are free, and the quote you approve is the price you pay. Call (833) 918-6938 to schedule a look.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Claremont Customers Say
"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Gilbert Castillo"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Stephanie Delaney"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Divya Gupta