Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Claremont
Gate repair in Claremont usually costs between $180 and $850 depending on whether we’re realigning a sagging wood gate, replacing a hinge post footing, or rebuilding a vintage wrought-iron gate in one of the city’s historic districts. Most residential repairs are done in a single visit, and we quote a firm price before any work starts. If your gate is binding, dragging, or won’t stay latched, call (833) 918-6938 and we’ll get a technician out to your home.
We know Claremont’s gates the way only a local specialist can. The Craftsman homes near the Colleges, the Spanish Colonials tucked into the Village, the mid-century tracts up toward 91767 – each part of Claremont has its own gate problems, and we’ve seen all of them. Allen Prescott started Falcon Gate Repair to serve homeowners and property managers who don’t want a garage-door tech guessing at their gate system. We’re Gate Repair specialists, nothing else, and we work on your brand specifically.
Why Falcon Gate Repair Is Claremont’s Preferred Gate Repair Company
Claremont homeowners call us because we already know what’s wrong before we pull into the driveway. A sagging carriage gate on a 1920s Craftsman near Scripps College? That’s a wind-loosened hinge post footing plus sun-checked wood that won’t hold screws without pre-drilling. A slide gate stopping mid-track on a commercial property off Foothill Boulevard? That’s usually a bad limit switch or a worn drive gear, not the operator itself. This kind of pattern recognition comes from working on gates in Claremont week after week, not from a generic service manual.
We carry repair parts for FAAC, BFT, Linear, and Viking operators on our trucks, so we’re not making a second trip across town to fetch a control board or a hinge set. Our response time to most Claremont neighborhoods – including 91711 and 91767 – is typically same-day or next-morning for residential calls. We’re not a garage-door company that sidelines into gates. We’re gate-only specialists, and that focus shows in how fast we diagnose and how rarely we leave a callback.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Wrought Iron Gate Repair in Claremont
Wrought iron gate repair in Claremont is often as much about preserving the look of a historic property as it is about function. Many homes in the 91711 side of town have original iron driveway gates or garden gates that date back to the 1920s and 1930s. The iron itself is usually sound – it’s the hinge welds, the post anchors, and the latch hardware that give out after decades of Santa Ana wind cycling and temperature swings. A typical wrought iron gate repair in Claremont runs $220 to $650, depending on whether we’re patching a cracked weld, replacing hinges, or resetting a leaning post. We grind out the old weld, re-weld with matching rod, and finish so the repair doesn’t stand out from the original patina.
Matching Period Hardware Without Losing Character
In Claremont’s historic districts, swapping a Victorian-era latch for a box-store replacement can trigger design-review headaches. We source period-appropriate hardware and can often rebuild the existing latch mechanism rather than replacing it. The goal is a gate that opens smoothly and still looks like it belongs to the house.
Rust and Weld Repairs on Iron Gates
Claremont’s dry summers slow rust, but the wet winters and occasional coastal moisture push corrosion into any exposed weld seam. We clean the affected section back to bright metal before patching. If the rust has compromised a structural rail, we cut it out and splice in new stock rather than piling weld on top of rust.
Metal Gate Repair in Claremont
Metal gate repair in Claremont covers everything from aluminum pedestrian gates to steel driveway gates and commercial slide gates. The most common issues we fix are binding hinges from post footings that loosen in fall winds, bent top rails from cars clipping the gate edge, and slide gates that grind along the track because a wheel bearing is shot. A typical metal gate repair in Claremont runs $180 to $480 for hinge and alignment work, and $300 to $750 if we’re replacing a slide gate wheel assembly or re-welding a cracked frame member. We quote the full price before starting, so there are no surprises on the invoice.
Realigning and Reinforcing Metal Gate Posts
When a steel gate starts dragging on the latch side or won’t close square, the panel is rarely bent – the post has shifted. In Claremont’s sandy foothill soils, a post footing that was marginal when it was poured will work loose after a few seasons of wind load. We reset the post in fresh concrete and re-hang the gate level, which fixes the bind permanently.
Slide Gate Track and Roller Repairs
Slide gates on Claremont’s commercial properties and larger residential lots take a beating from gravel and debris. The first sign is usually a gate that stops in the same spot every time – that’s a worn roller or a kinked section of track, not an operator problem. We replace the rollers, true up the track, and re-check the operator travel limits.
Trusted Brands We Service in Claremont
Our technicians are factory-familiar with FAAC, BFT, Linear, and Viking gate operators, which matters when a Claremont homeowner has a system that’s been in the ground for 15 years and the original installer is long gone. We know the diagnostic logic of each brand – which fault codes mean what, which control boards fail in which order, and which older models have known weak points. Because we work on these brands daily and stock common components locally, we can often repair rather than replace. From the motor to the control board, we handle the whole system.
Common Gate Repair Problems We See in Claremont Homes
- Santa Ana wind-loosened hinge post footings. Every fall, the winds coming down off the San Gabriel Mountains shake gate posts in their footings. A gate that swung clean in September starts binding by November, and the panel itself is often fine – the post is the problem.
- Sun-checked wood that won’t hold hinge screws. Claremont’s hot, dry summers bake south-facing and west-facing wood gates until the screw holes widen and the hinges tear loose. We pre-drill and reinforce the stiles before re-hinging, which keeps the repair from failing in the next wind season.
- Winter rain swelling that masks hinge-post problems. When a wood gate drags in January but swings free by July, homeowners assume it’s just weather. It’s usually a footing that’s already loose, and the seasonal swelling hides it. We fix the post so the gate is true year-round.
- Vintage iron hardware that’s seized or worn past adjustment. Original wrought-iron latch mechanisms on Claremont’s older homes were never meant to last 90 years. We rebuild latches and hinges in place when possible, which keeps the historic look and avoids replacement hardware that looks wrong.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Claremont, CA
Gate repair pricing in Claremont reflects the age of the housing stock and the fact that so many gates are original to the property. A simple hinge replacement or latch repair runs $180 to $320. Realigning a sagging wood gate with post reinforcement runs $280 to $520. Full wrought iron gate repair – including welding, hinge replacement, and post reset – runs $350 to $750. Slide gate track and roller work on commercial systems starts around $300 and goes up with the size of the gate and hardware. Every job gets a written quote before we start, and you approve the number before any wrench turns. Call (833) 918-6938 for a free estimate on your specific gate.
We Also Serve Cities Near Claremont
Falcon Gate Repair is based in Upland, which puts us close to every corner of Claremont. We also handle gate repair calls in La Verne, Montclair, Pomona, and the surrounding foothill communities, usually with same-day or next-day response. If your gate is down and your property isn’t secure, call and we’ll tell you how soon we can be there.
Serving Claremont, CA – Our Local Coverage Area
We’re based in the Claremont area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Claremont
The Santa Ana winds don’t bend the gate – they work the hinge post loose in its footing, and the gate sags as the post leans. In Claremont, this is the single most common gate problem we fix. We reset the post footing, reinforce the stiles with pre-drilled holes, and re-hang the gate with stainless hinges. Call (833) 918-6938 to have a technician assess your post footing – estimates are free.
For most Claremont properties in 91711, powder-coated steel is the right choice – it holds up through the dry summers without fading, and it survives the winter rains without rusting. If the gate is within view of a designated historic district, we match the coating color to the original hardware and can still use galvanised underneath for longevity. We’ll recommend the right specification for your street and your house.
Yes. We rebuild vintage wrought-iron gates in place whenever the metal is structurally intact, preserving the original rail profiles, latch mechanisms, and decorative scrollwork. If a section is beyond repair, we splice in new stock and finish it to blend with the existing patina. Homeowners in Claremont’s historic districts regularly hire us because we don’t push modern replacements on older homes. Call for a free assessment and a written quote.
When a slide gate stops at the same spot every time, it’s usually a mechanical problem – a worn roller, a kinked track section, or debris built up at that point – not the operator. The operator’s limit switch is just responding to the resistance. We fix the track and roller first, then re-test the operator travel. This is a common repair in Claremont’s commercial properties and larger estate lots, and the fix is usually completed in one visit.
Yes. Automatic gates in Claremont are required to meet California safety standards, which means photo eyes or contact edges that stop and reverse the gate when a person, vehicle, or pet is in the path. We install and calibrate safety sensors on every automatic gate we open, including BFT, FAAC, Linear, and Viking operators. If your gate doesn’t currently have working safety edges, that’s a repair we can do same-day. Call (833) 918-6938 to schedule an inspection.
Contact Falcon Gate Repair in Claremont
If your gate is sagging, dragging, or not opening at all, call Falcon Gate Repair at (833) 918-6938 for a free estimate. Allen Prescott and our team of gate-only specialists serve Claremont, La Verne, Montclair, Upland, and Pomona with same-day or next-day response on most repair calls. We quote a firm price before any work begins, and we stand behind every repair we make. When your gate won’t close, your property isn’t secure – call us and we’ll get it swinging right.
Written by Allen Prescott, Owner at Falcon Gate Repair, serving Claremont and the San Gabriel Valley foothill communities.