Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in La Verne, CA
Falcon Gate Repair installs and services automated driveway gates throughout La Verne, from the citrus-era properties near Old Town to the hillside estates pushing into the San Gabriel foothills. Most La Verne gate jobs come down to two things: slope and age. Driveways here are frequently graded, curved, or wind-exposed, and the housing stock spans everything from 1920s ranch homes to mid-century tracts. That combination means gate posts lean, operators strain, and vintage hardware doesn’t always play nice with modern openers. We’re a gate-only shop, so we handle the full install or repair without asking you to call anyone else. Call (833) 918-6938 for a free estimate on any gate project in La Verne, 91750 or 91767.
Why La Verne Homes Are Different
La Verne isn’t a single-style suburb. The 91750 side holds Old Town La Verne and its early-1900s citrus and ranch-era lots, where drive gates are often original wrought iron or wood and need work that respects the period look. Push east into the 91767 tracts toward the Pomona border and you’re dealing with 1950s through 1970s vinyl and ornamental steel gates on flat suburban driveways. Then the foothill streets climb, and the work changes again: sloped driveways with underset footings, gates that bind on grade changes, and posts that lean after every Santa Ana event. Our installs and repairs in La Verne account for all of that. A heritage-conscious city like this doesn’t want a generic big-box gate bolted onto a century-old property, and we don’t install that way.
The climate does its own damage. Hot, dry inland summers bake wood gates until they warp and pull at their hinges. Santa Ana winds stress posts and hardware, especially on hillside lots where the wind funnels through. Winter rains expose footing problems and rust on older iron. In La Verne specifically, we get a recurring call pattern right after wind season: sagging gates and leaning posts from footings that were never set deep enough for the slope they’re on. That’s not something a generalist handyman catches on the first visit, but it’s the first thing we look for here.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main La Verne Services
Homeowners in La Verne reach out to us most often for two things: a gate that won’t open or close safely, and an electric system that’s failed at the motor or control board. Both are covered in depth on their own pages, and both start with the same call.
Gate Repair in La Verne
A sagging gate on a sloped La Verne driveway isn’t just an annoyance, it’s a load problem that wears out hinges, rollers, and the operator faster every week it goes unfixed. Whether you’ve got a vintage wrought-iron gate near Old Town that won’t latch square or a vinyl gate in a 1960s tract that’s dragging on its track, we repair the frame, hardware, and alignment so it moves the way it should. We see a lot of wind-related post lean in the foothills after Santa Ana season, and we fix the gate and the cause, not just the visible symptom. Full details are on our Gate Repair in La Verne page.
Electric Gate Repair in La Verne
When a gate stops responding to the remote, the keypad, or the loop detector, the fault is usually in the motor, a control board, or a safety sensor, not the gate itself. That’s our everyday work. We diagnose by brand logic across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we’re not guessing at your system’s wiring. For La Verne homeowners, wind and dry heat put extra stress on exposed motors and connections, which means failures tend to show up at the worst time. See Electric Gate Repair in La Verne for what we check and what it costs.
Gate Installation in La Verne
Most La Verne gate installations involve one of two scenarios: replacing a worn-out gate and operator on an older property, or adding a first automated gate to a hillside or foothill-edge driveway. Both require more than a catalog order. La Verne’s graded and curved driveways mean the gate’s swing arc, track placement, or slide path has to be measured against the actual grade, not a flat assumption. And on the older properties near Old Town, the new gate usually needs to match the home’s era, which is why we talk through style and hardware before ordering anything. Falcon Gate Repair handles Gate Installation from the first site measure through the final operator programming.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to manually swing a gate open every time you come home.
What it costs in La Verne
A complete automatic gate installation in La Verne, including the operator and the gate itself, typically runs $3,500 to $9,000 depending on gate size, material, and access wiring.
How we do it
We measure the driveway grade and setback, set or reinforce the footings, hang the gate, install the operator, and program remotes, keypad, and safety sensors.
Sliding Gate Installation
Signs you need it
Your driveway is too steep or too short for a swinging gate, or the existing swing gate constantly binds on the grade.
What it costs in La Verne
Sliding gate installation in La Verne typically runs $4,000 to $10,000, with the track and cantilever hardware driving more cost on graded lots.
How we do it
We set the track or cantilever rollers on a level run, hang the gate with proper clearance for the slope, mount the operator, and set travel limits and safety edges.
What Gate Installation Costs in La Verne
| Item | Typical range in La Verne |
|---|---|
| Automatic gate installation (gate + operator) | $3,500 – $9,000 |
| Sliding gate installation | $4,000 – $10,000 |
| Gate operator only (installed on existing gate) | $1,250 – $3,000 |
Do you pull permits for gate installation in La Verne?
Most residential gate replacements don’t require a permit, but La Verne may require one when footings or electrical are new, or when the gate sits near a public right-of-way. We confirm requirements for your address before any work starts.
How long does a gate installation take in La Verne?
Most La Verne installs are complete in one to two days. Custom gates or those needing new footings and electrical runs can take longer, and we give you a clear timeline when we quote. Call (833) 918-6938 for a free measure.
Brands We Service in La Verne
We work on the gate operator brands La Verne homeowners actually have. FAAC and BFT show up on a lot of the hillside and custom installs, Linear on mid-century tract homes, and Viking on commercial and multi-tenant entries. We keep common boards, remotes, and sensors in local stock so repairs don’t stall waiting on parts. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in La Verne, CA
| Service | Typical range in La Verne |
|---|---|
| Gate repair (alignment, hinges, hardware) | $165 – $575 |
| Operator repair (motor or control board) | $225 – $650 |
| Operator replacement | $1,250 – $3,000 |
| Automatic gate installation (gate + operator) | $3,500 – $9,000 |
| Sliding gate installation | $4,000 – $10,000 |
| Keypad or receiver replacement | $150 – $350 |
| Safety sensor or loop detector replacement | $175 – $400 |
| Post replacement or reset | $350 – $950 |
In La Verne, the price goes up when footings were never set deep enough for the slope and we have to reset them properly, or when a hillside install needs extra conduit and a longer power run. That’s part of the measure, not a surprise. Every job is quoted and agreed before any work begins, with no per-visit surprises.
Neighborhoods We Serve in La Verne
Falcon Gate Repair covers all of La Verne, 91750 and 91767, including the areas where gate work gets complicated fast.
- Old Town La Verne
- Foothill estates north of Foothill Boulevard
- Tracts near La Verne Heights and Heritage Park
- Neighborhoods along Wheeler Avenue and Damien Avenue
- The 91767 side toward the Pomona border
Most La Verne calls are answered same day or next morning, depending on when you reach us. Hillside and wind-damage repairs get prioritized because a gate that won’t close is a security problem, not a convenience one.
Service Area – Cities Near La Verne
Falcon Gate Repair serves La Verne and the surrounding foothill and valley cities. If you’re in Claremont, CA, along the northern edge in Pomona, CA, over in Montclair, CA, or east toward San Dimas, CA, the same gate-only crew covers your area. Call (833) 918-6938 and we’ll confirm same-day or next-day availability for your address.
Serving La Verne, CA – Our Local Coverage Area
We’re based in the La Verne area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in La Verne
Most La Verne repair calls are scheduled same day or next morning. Hillside wind damage and gates that won’t close get priority because an open gate on a sloped driveway near the foothills is an active security issue. Call (833) 918-6938 early and we’ll get you on the route.
Some La Verne neighborhoods, especially newer foothill developments, have HOA guidelines on gate style, height, and operator placement. If your property is covered, we’ll work from those specs so the install passes review the first time. Bring the HOA’s gate requirements to the first measure.
We handle both. Gate automation is our core work, which includes the motor, control board, keypad, safety edges, and the power run to the operator. You won’t need a separate electrician, and we quote the complete job upfront before any work starts.
Call Falcon Gate Repair at (833) 918-6938 for gate work in La Verne, CA. We quote the full job before we start, and we’re the ones who actually show up and fix it.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What La Verne Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Alicia Carter"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Adam Sullivan"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Ryan Doyle