Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Covina, CA
Gate installation in Covina means matching the right system to the right ZIP code. The 91722 and 91723 core around Downtown Covina holds block after block of mid-century homes with original wrought-iron gates, while 91724 on the Charter Oak side favors newer sliding drive gates with automatic openers. A new gate here has to handle Inland San Gabriel Valley heat, Santa Ana wind gusts, and clay-heavy soil that shifts posts over time. Falcon Gate Repair handles the full installation job: from footing to final operator programming. If you’re weighing a repair against a replacement, call us at (833) 918-6938 and we’ll give you a straight answer.
Why Covina Homes Are Different
Covina’s housing stock was largely built between the 1940s and 1960s, and the gates that went in with those homes are still standing on many lots. The older core near Citrus Avenue and the neighborhoods around Covina Park is dense with welded wrought-iron walkway gates and driveway gates that have been repainted, re-hinged, and re-welded for decades. These gates fail differently than the aluminum sliding gates you see on the east side toward Charter Oak. On an old iron gate, the problem is often the post, not the hinge. Covina sits on expansive, clay-heavy San Gabriel Valley soil, and a post set in concrete in 1955 has had 70 years to shift. When the footing moves, the gate sags, drags across the walkway, and no hinge adjustment will hold it level. The post has to be dug out and reset, which is a different job than a simple hardware swap and one we do regularly here.
Climate adds a second layer. Dry summer heat bakes paint and accelerates surface rust on iron gates, while Santa Ana wind events in fall stress hinges, latches, and lighter fence-gate assemblies until posts rack loose. Then winter rain, when it comes, finds every rusted weld joint and worn hinge that the dry months exposed. Covina’s gate problems are seasonal and predictable once you’ve worked the area long enough. The east side’s newer tract developments have their own failure modes: operator boards that burn out, rollers that chew through tracks, and safety eyes knocked out of alignment by wind-driven debris. We see the split clearly, and we stock and plan for it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Covina Services
Most calls we take in Covina fall into two categories: a gate that no longer opens or closes predictably, or a gate that never had a motor and should have one. Both are covered by our Covina gate pages below.
Gate Repair in Covina
On a Covina repair call, the first thing we do is read the gate’s age and construction. A sagging iron gate on an older 91722 lot almost always points to a shifted post in expansive clay, not a hinge problem. A sliding gate that jams on the Charter Oak side more often comes down to a worn roller or a track that’s been knocked out of line. We address the root cause and don’t just grease the symptom. Full details, including what repair costs in Covina and how quickly we can get out, are on our dedicated page: Gate Repair in Covina.
Electric Gate Repair in Covina
Electric gates fail in predictable ways in Covina: control boards that cook in unvented steel housings during summer heat, loop detectors that stop reading, and limit switches knocked out of calibration by wind. We carry control boards, keypads, and safety hardware for all the brands we service, and we diagnose by the operator’s brand logic rather than guessing from a wiring diagram. For Covina-specific pricing, response times, and common electric gate failures, see Electric Gate Repair in Covina.
Gate Installation in Covina
A gate installation in Covina should be planned around the property’s era and the soil it sits on, because both determine what gets buried in the ground and what gets bolted to it. Older lots on the west side often need a new post footing dug deeper than the original, especially where clay expansion has already shifted the old gate. Newer 91724 properties are typically better candidates for modern automatic sliding gates with operators that handle daily cycles without complaint. Whether you’re replacing a failing 1960s iron gate or adding a motorized driveway gate to a newer home, we quote the full scope before any work starts. Falcon Gate Repair offers Gate Installation for both residential and light commercial properties across Covina.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to open a driveway gate manually, or the gate you have can’t be automated without rebuilding half of it.
What it costs in Covina
Automatic gate installation in Covina typically runs from $3,500 to $7,000 depending on operator type, gate weight, and whether new conduit and power runs are needed.
How we do it
We set or reinforce the posts, hang and level the gate, mount the operator to the manufacturer’s spec, run power and low-voltage control wiring, install safety edges and photo eyes, and program remotes and keypads before we leave.
Driveway Gate Installation
Signs you need it
Your current driveway gate sags, won’t close square, or you want a wider opening for larger vehicles.
What it costs in Covina
A new driveway gate installation in Covina generally falls between $2,500 and $5,500 depending on gate width, material, and automation.
How we do it
We remove the old gate if present, install new posts with concrete rated for the gate’s weight, hang the gate with adjustable hinges, and align the latch and any operator components so it closes square on day one.
Sliding Gate Installation
Signs you need it
You have a long driveway or a steep grade where a swing gate would bind, scrape, or waste useful space.
What it costs in Covina
Sliding gate installation in Covina typically starts around $4,000 and runs to $8,000 or more with automation, depending on track length and gate weight.
How we do it
We pour a level track bed with proper drainage, set the track and post bases, install the gate frame and panels, add top guide rollers and end stops, then mount and test the operator if the gate is automated.
What Gate Installation Costs in Covina
| Item | Typical range in Covina |
|---|---|
| Walkway gate, fabricated and installed | $1,200 – $3,200 |
| Driveway gate (manual or automated) | $2,500 – $5,500 |
| Automatic operator and controls | $1,200 – $3,500 |
Soil conditions on Covina’s older west-side lots add cost when post footings need to be dug deeper and re-set in fresh concrete. On the east side, costs shift toward operator and rail work. Every quote is line-itemed and agreed before we start.
Can you install a gate on clay soil like we have around Downtown Covina?
Yes. The fix is in the footing: we dig past the active clay zone and set posts in deeper, properly cured concrete with drainage so shifting soil doesn’t move the gate. This is standard practice for us on older Covina lots.
How long does a full gate installation take in Covina?
Most residential installations finish in one to two days from footing to final programming. Custom iron work may add a few days because we have to fabricate, paint, and let the finish cure before we hang it.
Brands We Service in Covina
We carry parts and factory logic for the operators most common around Covina, including FAAC, BFT, Linear, and Viking. On most service calls, the board, keypad, or limit switch we need is already in the van instead of on someone’s order sheet. That means fewer return trips and a faster turnaround. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Covina, CA
| Service | Typical range in Covina |
|---|---|
| Gate repair service call and diagnosis | $89 – $149 |
| Hinge or latch replacement | $180 – $420 |
| Weld repair on wrought iron | $250 – $600 |
| Post reset (shifted footing) | $450 – $1,000 |
| Electric gate board replacement | $350 – $850 |
| Operator replacement (parts and labor) | $1,200 – $3,500 |
| Loop detector or safety edge replacement | $300 – $700 |
| Walkway gate, fabricated and installed | $1,200 – $3,200 |
| Driveway gate (manual or automated) | $2,500 – $5,500 |
| Full installation with automatic operator | $3,500 – $7,000 |
Costs in Covina push higher where the work involves resetting a shifted post on older clay-heavy lots or replacing a full operator system instead of just a board. Every job is quoted at a fixed price before we start, so the number on the estimate is the number on the invoice.
Neighborhoods We Serve in Covina
We run service calls across Covina’s three ZIP codes, and the equipment we bring depends on which side of town we’re heading to. The iron-heavy older core needs welding gear and post-reset tools. The east side needs operator diagnostics and sliding-gate hardware. Most areas see us same day or next morning.
- Downtown Covina
- Charter Oak
- Covina Hills
- Walnut Creek area
- Northview
Service Area – Cities Near Covina
Falcon Gate Repair covers Covina and the surrounding San Gabriel Valley cities. We regularly serve San Dimas, CA to the east, Glendora, CA to the north, Pomona, CA to the east, and Diamond Bar, CA to the south. If you’re just over the city line, call us and we’ll let you know our next available slot.
Serving Covina, CA – Our Local Coverage Area
We’re based in the Covina area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Covina
We typically reach Covina addresses within one business day, and same-day is common when you call before mid-morning. Emergency calls for gates that are stuck open or failing to secure a property get prioritized. Call (833) 918-6938 and we’ll give you a real arrival window, not a four-hour range.
Most residential gate replacements and repairs don’t require a permit, but new driveway gates with electrical runs can. Covina’s rules depend on gate height, setback, and whether power needs new conduit. We’ll tell you exactly what applies to your property before any work starts, so you don’t get a surprise from the city.
Yes, and that’s part of why we’re gate-only. If a repair reveals that the gate or operator is beyond saving, we can price and schedule the replacement without handing you to another company or another trade. You get one crew that already knows the property.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Covina Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Divya Gupta"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Elena Martinez"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Alicia Carter