Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Glendora, CA
Falcon Gate Repair installs, repairs, and services automated gate systems across Glendora’s 91740 and 91741 ZIP codes. Gate installation here isn’t a standard hardware swap. The foothill terrain, older mid-century lots, and steep driveway approaches in 91741 mean most Glendora gates need custom measurement, slope correction, and sometimes seismic bracing before a new operator ever gets mounted. Call (833) 918-6938 for a free estimate on any gate project in Glendora.
Why Glendora Homes Are Different
Glendora sits at the base of the San Gabriel foothills, and that geography shapes nearly every gate we work on. The 91741 hillside neighborhoods off Sierra Madre and Glendora Mountain Road are built on grades that climb fast. Driveway gates there often span sloped, retaining-wall-flanked openings where one hinge post sits a foot higher than the other. That’s not a measurement problem to solve on the fly; it’s the defining condition of the job.
Hot, dry summers and Santa Ana wind events stress gate hardware in ways coastal cities never see. Powder coating fades faster. Wood gates crack along the grain. Metal posts shift as the ground expands and contracts through the seasons. And because Glendora is in a foothill seismic zone, we regularly find gate posts and masonry columns that have gone out of plumb from years of small ground movements. A gate that worked fine in March can bind at the latch by October.
On the larger hillside lots and horse properties toward the foothill edges, gates also serve as fire-defensible-space boundaries. Replacements often need to meet brush-clearance setbacks and noncombustible-material expectations while still clearing a steep, settling driveway apron. We factor that into every estimate for those neighborhoods.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Glendora Services
Most Glendora homeowners call us for one of two reasons: a gate that has stopped working, or a gate that needs upgrading to something safer and more reliable. Both start with a free on-site assessment.
Gate Repair in Glendora
Manual and automated gates in Glendora fail in predictable ways given the local conditions. Hinges rust and sag on older wrought-iron gates near the Route 66 corridor. Posts shift out of plumb in foothill seismic zones. Latches stop catching when the ground settles. We repair swing and sliding gates, replace worn hardware, and straighten gates that have dragged or bound for years. Gate Repair in Glendora covers the full scope of what we fix, from a stuck hinge to a complete gate rebuild.
Electric Gate Repair in Glendora
Automated gate systems fail for different reasons than manual gates. Control boards burn out during Santa Ana season when power fluctuates. Safety loops buried under asphalt driveways crack from ground movement. Motors strain against gates that drifted out of alignment. We work on motors, circuit boards, keypads, and safety edges every day, and we diagnose by brand logic, not guesswork. Electric Gate Repair in Glendora explains how we get automated systems back in service.
Gate Installation in Glendora
Gate installation in Glendora starts with the driveway, not the gate. The hillside lots in 91741 and the older tract homes in 91740 each present different challenges: steep approach grades, settled concrete aprons, narrow setbacks, and older posts that may not be worth saving. We measure the opening, check post plumb, assess the slope, and then recommend a gate and operator rated for the actual conditions. We install both the gate structure and the automation in one project, so you don’t need to coordinate two companies. See Gate Installation for the full scope of our installation work.
Automatic Gate Installation
Signs you need it
You’re opening and closing a heavy gate by hand every day, often on a slope where the gate wants to swing into you.
What it costs in Glendora
A full automatic gate installation in Glendora typically runs $3,200 to $7,800, depending on gate width, terrain, and operator brand.
How we do it
We lay out the opening, set or sleeve the posts, hang the gate, mount the operator, and run the power and safety loops, then calibrate travel limits and force settings so the gate opens smoothly on your grade.
Driveway Gate Installation
Signs you need it
Your existing driveway gate sags at the latch, drags across the apron, or no longer clears the slope it was originally built for.
What it costs in Glendora
A new driveway gate in Glendora, hung on existing posts, ranges from $1,500 to $4,200; full post-and-gate replacement runs $2,800 to $7,500.
How we do it
We measure the exact opening and grade, fabricate or order a gate sized for the slope, install it with hinge anchors rated for the load, and adjust the latch and stops for a clean close every time.
Sliding Gate Installation
Signs you need it
Your driveway is too steep or too short for a swing gate, or the existing swing gate blocks the apron every time it opens.
What it costs in Glendora
Sliding gate installation in Glendora ranges from $2,500 to $6,700, with the track, gate, and operator included.
How we do it
We set a steel track or cantilever system rated for the gate’s weight, hang the sliding panel, mount the operator, and tune the stop and safety edge for the slope.
What Gate Installation Costs in Glendora
| Item | Typical range in Glendora |
|---|---|
| Driveway gate (new, hung on existing posts) | $1,500 – $4,200 |
| Full gate and post replacement | $2,800 – $7,500 |
| Automatic gate with operator | $3,200 – $7,800 |
How much does a new automatic gate cost in Glendora?
A new automatic gate in Glendora runs $3,200 to $7,800 installed. Steep driveways, wide openings, and higher-end operators like BFT or Linear push the price toward the top of that range. Call (833) 918-6938 for a written quote.
Do I need a permit for a gate in Glendora?
Most residential gate replacements don’t require a permit, but new electrical runs and gates in fire-defensible-space zones sometimes trigger review. We’ll flag any permit question at the estimate stage so there are no surprises later.
Brands We Service in Glendora
We service and install BFT, Linear, Viking, and Ghost Controls operators in Glendora, among others. Because we’re factory-familiar with each brand’s control logic, we diagnose faster and stock the parts these systems actually need. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Glendora, CA
| Service | Typical range in Glendora |
|---|---|
| Automatic gate installation | $3,200 – $7,800 |
| Driveway gate installation (existing posts) | $1,500 – $4,200 |
| Full gate and post replacement | $2,800 – $7,500 |
| Sliding gate installation | $2,500 – $6,700 |
| Gate repair (manual, hinges, latch) | $150 – $650 |
| Electric gate repair (motor, board, safety) | $175 – $900 |
| Operator replacement (residential) | $700 – $1,800 |
| Control board replacement | $350 – $950 |
| Keypad or intercom install/replacement | $250 – $750 |
| Safety loop repair or replacement | $250 – $800 |
Hillside lots in 91741 tend to run higher because of the extra labor for slope grading, post bracing, and longer electrical runs. Every Glendora quote is fixed and agreed before any work starts, so the number we give you is the number you pay.
Neighborhoods We Serve in Glendora
We work throughout Glendora and typically reach most neighborhoods the same day for repair calls. Installation visits are scheduled after a free measure.
- Downtown Glendora (91740)
- North Glendora foothills (91741)
- Glendora Village area (91740)
- Sierra Madre corridor (91741)
- Foothill Boulevard neighborhoods (91740)
Service Area – Cities Near Glendora
Falcon Gate Repair is based in Upland and serves Glendora plus the surrounding foothill and valley communities. We regularly work in San Dimas, CA, Covina, CA, Pomona, CA, and La Verne, CA. If your gate is in one of these areas, the same team and the same upfront pricing apply.
Serving Glendora, CA – Our Local Coverage Area
We’re based in the Glendora area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Glendora
Most Glendora repair calls are same-day or next-day, depending on parts. We stock the common motors, boards, and safety edges for the brands we service, so we’re often able to fix the gate on the first visit. Call (833) 918-6938 and we’ll give you a straight arrival window.
Some hillside HOAs in 91741 do regulate gate height, material, and color, especially for street-facing driveways. We’ll work from your HOA’s design guidelines if you have them, and we’ll flag any obvious conflicts during the site measure.
Yes. We run the power, install the operator, wire the keypad or intercom, and set up the safety loops as one job. You won’t need a separate electrician or a second contractor to finish what we start.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Glendora Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Alicia Carter"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Adam Sullivan"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Ryan Doyle